Ever-increasing working hours at a stretch and higher tractor utilisation require optimum working conditions to aid in protecting the driver’s health and combating fatigue. The 400 Vario meets this objective perfectly. Well thought-out ergonomics and a logical, productive control philosophy simplify all the work waiting to be done.

• Clear cab concept with focus on essentials
• Pleasantly quiet work place
• Perfect ergonomics and easy to operate controls
• Height and tilt-adjustable steering wheel
• Varioterminal for fine settings
• Fold-down passenger seat

You have all the Vario drive technology under control with the joystick, which has been ergonomically integrated in the armrest. All that is necessary to accelerate, decelerate and reverse or activate the cruise control is to move the joystick. Besides the transmission controls, the joystick also has control keys for 2 hydraulic valves and activation buttons for the automatic functions.

• Driving functions (acceleration, deceleration), cruise control, stepless reversing
• Hydraulic valve controls
• Activation of automatic modes
• Located directly next to the crossgate lever, which operates two hydraulic valves

Push the joystick forward to accelerate the Vario. To slow down, simply pull the joystick back again. Driving in reverse is just as easy - only the other way around.

Do you need to reverse quickly? Simply move the joystick to the left - the Vario decelerates to a standstill and drives off again in the opposite direction. Activate the cruise control with a simple movement to the right.

For all drivers who must work long hours in their tractors to ensure the success of their business, operating and driving comfort have the highest priority. With the Variotronic, Fendt provides optimum operating comfort for highest productivity.

• EHR rear power lift and rear PTO controls
• Front power lift controls (optional) and front PTO engagement
• PTO speed preselection
• Hand throttle
• Front axle suspension
• Cruise control speed preselection
• Intelligent 4WD and differential lock engagement

Depending on the setting, 4WD and differential locks can be automatically engaged and disengaged, dependent on steering angle and travel speed. If you select the 100 percent 4WD mode or the 100 percent lock mode for the front and rear differential, these are engaged permanently. Both of these functions can be engaged and disengaged under load in automatic as well as 100 percent modes.

The multiple award-winning Fendt Varioterminal offers you easy-to-use, logical controls. It makes simple applications even simpler and also aids the experienced driver during complex operations.

• Fine settings for all transmission, linkage and hydraulic control valve functions
• Settings for engine speed and various cruise control memories
• Adjustment of maximum output control to your work
• Permanent storage of settings for various devices or implements
• VariotronicTI headland management
• Recording of important parameters, such as distanced travelled or area worked
• Standard-equipped fuel consumption indicator
• ISO bus implement control
• Camera for perfect overview (optional)

Benefits

• Time saved at the headland
• Increase in area coverage
• Sustained driver relief on long working days
  

Save time and prevent operating errors

• Settings are made easily on the terminal
• Trigger functions from the joystick with the push of a button.
  

Saves

• 4 implements with
• 16 operating sequences with up to
• 13 functions each

With the optional Fendt implement control, you profit from low purchase costs and enhanced operating comfort. Without implement control, a separate terminal is required for each implement, but with implement control, you can control all ISO and LBS implements conveniently with the Varioterminal and the joystick. This enables uniform and simple operating logic with optimum operating ergonomics.

• No additional terminal necessary at extra cost
• No cable clutter in the cab
• Optimised ergonomics
• Reduced purchase costs