Ever-increasing working hours at a stretch and higher tractor utilisation require optimum working conditions to aid in protecting the driver’s health and combating fatigue. This applies to compact standard tractors just as much as to high-horsepower tractors. The 300 Vario has a workplace that you won’t want to do without.

• Clear cab concept with focus on essentials
• Pleasantly quiet work place
• Perfect ergonomics and easy to operate controls
• Back-lit control elements for night operations
• Height and tilt-adjustable steering wheel
• Electrohydraulic controls for 4WD, differential locks and PTOs

The single-gate Fendt Variostick gives you the simplest control over the transmission on the 300 Vario. With the Variostick, you can accelerate the 300 Vario from standstill to the desired speed steplessly. Move the Variostick in the opposite direction, and the tractor decelerates. It has never been easier to operate a transmission.

• Stepless from 0 – 40 km/h forward
• Stepless from 0 – 25 km/h reverse
• Stepless reversing
• Settable acceleration ranges
• The cruise control activation keys and the electronic hand throttle are located directly below the Variostick, well within reach

Push the Vario Stick forward to accelerate the Vario. To slow down, simply pull the joystick back again. Driving in reverse is just as easy – only the other way around.

Driving Fendt Vario: ingeniously simple – simply ingenious

The cockpit in the 300 Vario was completely redesigned: In addition to displays for engine and PTO speeds, it also has displays for the compressed air supply, engine temperature and fuel supply. Located in the centre is the new multi-display for the 300 Vario. The driver has everything in view and everything at hand.

• Engine speed memory
• Cruise control memory
• Automatic maximum output control
• Acceleration ranges
• Time
• Fuel consumption indicator

• Compressed air supply
• Fuel tank
• Engine temperature
• Engine speed indicators
• Ground speed indicators
• Multi-display

All the tractor control elements are located on the right-hand console, which houses the Variostick as well as the power lift, PTO and comfort controls. Back-lit control elements guarantee safe operation, even at night. Perfect ergonomics for fatigue-free working conditions.

• Control pad for multi-display
• EHR power lift controls
• EHR power lift settings
• PTO management
• Electrohydraulic controls
• Hand throttle
• Variostick
• Cruise control activation and acceleration rates

You will come to appreciate the operating comfort of a 300 Vario, especially during row crop work, when you often have to operate the PTO and 4WD engagement simultaneously. It offers you extensive and high-quality PTO management and convenient operation of 4WD and differential lock engagement.

The PTO engagement is an electrohydraulic control with 3-speed preselection. The PTO automatic mode, a highly appreciated feature found in the high-horsepower Vario ranges, is also standard.

• PTO automatic mode (automatic engagement dependent on height of the linkage)
• Electrohydraulic PTO controls with start-up control
  - lower servicing costs and
  - longer implement service life

The 300 Vario has electro-hydraulic 4WD engagement and can be engaged and disengaged under load. The same applies to the differential locks at the rear. If required, the front axle differential can be locked automatically via the Locomatic function.
This transfers the required power to the ground fast, in all situations.